Installation service fee (Shower Screen length over 1.5m)

Professional on-site installation service for Shower Screens, carried out by qualified external contractors engaged for Shower Screen installations.

Service scope – included

• Site check of the shower area and surrounding surfaces to confirm suitability for Shower Screen, including wall condition, flatness, structural support, tile finish, floor level, shower tray or curb condition, available fixing surfaces, access for glass handling and clearance from nearby fixtures.

• Assessment of the proposed Shower Screen configuration, including the total length, number and size of glass panels, door position, opening direction, support requirements and suitability of the existing walls, floor, shower tray or curb.

• Positioning and marking of the Shower Screen according to the approved design drawing, specified glass configuration, shower layout and alignment with the walls, shower tray, floor, vanity and other bathroom fixtures.

• Installation of the supplied wall channels, brackets, hinges, supports, handles, seals and other approved mounting hardware suitable for the wall type, glass configuration and total Shower Screen length.

• Secure installation of the fixed glass panels, doors and associated components onto the prepared walls, floor, shower tray or curb.

• For Shower Screens exceeding 1.5 m in total length, handling and installation by two or more qualified installers, with additional lifting, positioning and safety precautions as required for the size and weight of the glass panels.

• Installation and adjustment of shower doors, where applicable, to confirm smooth opening, closing, alignment and operation.

• Application of approved sanitary-grade silicone sealant and installation of supplied seals or gaskets at the required joints to help provide a neat, water-resistant enclosure.

• Enhanced level, plumb and alignment checks along the full length of the Shower Screen to ensure that the glass panels, doors, channels, brackets and supports are straight, stable and properly aligned.

• Functional check of doors, hinges, handles, rollers, brackets, supports, seals and other supplied hardware, where applicable.

• Basic cleaning of the work area after installation and briefing the customer on care, daily use and maintenance recommendations for the Shower Screen.

Customer responsibilities / prerequisites

To ensure a smooth installation for Shower Screen, please confirm and prepare the following before the installation date:

• A site assessment and feasibility review have been completed, and the final Shower Screen dimensions, total length, glass configuration, door position, opening direction and support arrangement are confirmed according to the approved design drawing.

• Wall construction is complete, structurally sound and suitable to support the Shower Screen and its mounting hardware, including the additional load and leverage associated with the longer installation.

• All demolition, tile work, waterproofing, plastering, painting, flooring, shower tray, curb and related bathroom works are completed before installation.

• Walls and floors are sufficiently level, plumb, flat and stable for the approved Shower Screen design. Any significant deviation that could affect the alignment or safe installation of the longer Shower Screen must be corrected before the installation date.

• Waterproofing is fully completed and cured before drilling or fixing work begins.

• The installation area is fully cleared of old Shower Screens, shower doors, furniture, packaging, tools and debris, with clear and unobstructed access to the shower area.

• Sufficient access, doorway clearance, corridor space, turning space and working room are available for the safe delivery, lifting, handling and positioning of glass panels.

• The shower tray, curb, floor and wall surfaces are complete and capable of receiving the specified fixings, channels, brackets and sealant.

• Any required wall reinforcement, concealed blocking, structural support, suitable anchors or additional support points are provided in advance where the wall construction cannot safely support the longer Shower Screen using standard fixings.

• All required products, including glass panels, doors, wall channels, brackets, hinges, handles, supports, seals, gaskets, screws and other mounting hardware, are delivered and on site before installation.

• The customer acknowledges that larger or longer glass panels require careful handling and that installation may be postponed if the site conditions, access, wall support or safety conditions are unsuitable.

• The shower area is not used until the silicone sealant and other installation materials have adequately cured.

• After installation, the customer must inspect the Shower Screen for any water leakage around silicone-sealed joints and check all functional components, including door alignment, opening and closing, hinges, handles, rollers, brackets, supports and seals. Any defects or concerns must be reported to INFINITE within 72 hours of installation, together with relevant photos or videos where applicable. If no concerns are reported within this period, the installation will be deemed completed and accepted by the customer.Any subsequent adjustment, follow-up visit or rectification requested by the customer that is not attributable to an installation defect or the installer’s workmanship may be subject to additional charges.

Not included in this service

• Wall cutting, chasing, reinforcement, levelling, plastering, tiling, waterproofing, flooring, shower tray installation, curb construction or other wall and floor preparation works.

• Correction of uneven, out-of-plumb, damaged or unstable walls, floors, shower trays or curbs.

• Additional structural reinforcement, wall modification, floor strengthening, ceiling or access alteration, special lifting equipment or other preparatory works required specifically because the Shower Screen exceeds 1.5m in total length, unless expressly included in a separate quotation.

• Relocation or installation of plumbing, drains, shower fittings, faucets or other bathroom services.

• Modification of cabinetry, vanity units, tiles, wall finishes, flooring or other surrounding fixtures.

• Removal or disposal of existing Shower Screens, shower doors, tiles, furniture or general demolition debris.

• Supply of the Shower Screen, glass panels, doors, wall channels, brackets, hinges, handles, supports, seals, gaskets, fixings or other components unless specifically stated in the quotation.

• Cutting, drilling, grinding, polishing, resizing or other modification of glass panels or supplied Shower Screen components on site, unless specifically included in a separate package.

• Installation of additional shelves, towel rails, grab bars, shower accessories or other items not supplied with the Shower Screen.

• Repair of defective, unsafe or non-compliant existing walls, floors, waterproofing, shower trays or curbs.

• Any plumbing, basin, faucet, vanity, cabinet or electrical installation works.

• Any additional installation time, labour, transport, handling equipment or special access arrangements required due to the Shower Screen exceeding 1.5 m in total length, unless expressly included in the quotation.